External And Extension Telephones; Connecting An External Or Extension Telephone; For Fax/Tel Mode Only; Using A Non-Brother Cordless External Handset - Brother DCP-1510 User Manual

Chapter 8
External and extension
telephones
NOTE
An external telephone is available only for
MFC-1810 and MFC-1811.
Connecting an external or
extension telephone
You can connect a separate telephone
directly to your machine as shown in the
diagram below.
1
2
EXT.
1 Extension telephone
2 External telephone
3 Protective Cap
Before you connect an external telephone,
remove the protective cap (3) from the EXT.
jack on the machine.
When you are using an external telephone,
the LCD shows Telephone.
48
LINE
3
(Example
for Australia)

For Fax/Tel mode only

When the machine is in Fax/Tel mode, it will
8
use the F/T Ring Time (fast double-ringing) to
alert you to pick up a voice call.
Lift the external telephone's handset
(MFC-1810 and MFC-1811 only) or the
machine (MFC-1815 only), and then press
Hook or Hook/Hold to answer.
Using a non-Brother cordless
8
external handset
If your non-Brother cordless telephone is
connected to the telephone line cord (see
Connecting an external or extension
telephone on page 48) and you typically carry
the cordless handset elsewhere, it is easier to
answer calls during the Ring Delay.
If you let the machine answer first, lift the
cordless handset and then go to the machine
so you can press Hook or Hook/Hold to
transfer the call to the cordless handset.
NOTE
Not all brands of cordless telephones are
compatible for use with your machine.
8
8