Ecology Features; Deep Sleep Mode; Auto Power Off (Dcp-1510 And Dcp-1511 Only); Toner Settings - Brother DCP-1510 User Manual

Ecology features

Deep Sleep mode

If the machine does not receive any jobs for a
certain length of time, the machine will go into
Deep Sleep mode automatically and the LCD
will show Deep Sleep. The machine will
wake up when it receives a fax (MFC-1810,
MFC-1811 and MFC-1815 only) or a print job.
(For MFC-1815 only) Lifting the handset will
also wake up the machine from Deep Sleep
mode.
Auto Power Off (DCP-1510
and DCP-1511 only)
If the machine is in Deep Sleep mode for
several hours, it will then go into Power Off
mode automatically. Power Off mode is the
lowest power consumption mode, which
achieves a power consumption of
approximately 0.28 W. To disable the Power
Off mode, press and hold
a
Press Menu and then press a or b to
choose 1.General Setup.
Press OK.
b
Press a or b to choose 2.Ecology.
Press OK.
c
Press a or b to choose 2.Auto Power
Off.
Press OK.
d
Press a or b to choose how many hours
before the machine goes into Power Off
mode. Choose 1 hour, 2 hours, 4
hours, 8 hours or Off.
Press OK.
e
Press Stop/Exit.

Toner Settings

1
Toner Setting (Continue
1
mode)
You can set the machine to continue printing
after the LCD shows Replace Toner.
The machine will continue printing until the
LCD shows Toner Ended.
a
(For MFC-1810, MFC-1811 and
MFC-1815)
Press Menu, 1, 7 and go to step c.
(For DCP-1510 and DCP-1511)
Press Menu and then press a or b to
choose 1.General Setup.
1
Press OK.
b
Press a or b to choose 4.Replace
Toner.
Press OK.
c
Press a or b to choose Continue or
Stop.
.
Press OK.
d
Press Stop/Exit.
NOTE
• If you continue printing in the Continue
mode, the print may appear lighter.
• After replacing the toner cartridge with a
new one, the Continue mode will go back
to the default setting (Stop).
General information
1
1
29
1