Toshiba E-studio 2051c Troubleshooting Manual page 29

1.TROUBLESHOOTING FOR THE HARDWARE
Pull down the green lever on the right-hand unit of the
3
finisher.
The paper exit of the equipment opens.
Turn the green dial clockwise to send the paper and
4
remove it.
Return the green lever to its original position.
5
6 When the Hole Punch Unit is installed and used for
punching holes, while pulling the green dial toward
you, turn it to align the yellow marks on the parts.
7 Turn the upper green dial counterclockwise to remove
the misfed paper.
1 TROUBLESHOOTING FOR THE HARDWARE
2
1
Clearing a Paper Misfeed
1
1
2
2
27