Epson WorkForce WF-M1030 User Manual page 74

4. Hold down the cancel button as you press the
down both buttons until the
The printer begins printing a nozzle check pattern.
5. Do the following, depending on the results of the printer check:
• If the page prints and the nozzle check pattern is complete, the printer is operating properly. Any
operation problem you may have could be caused by your computer, cable, software, or selected
print settings. Check the other solutions in this manual or try uninstalling and reinstalling your
printer software.
• If the page prints but the nozzle check pattern has gaps, clean or align the print head.
• If the page does not print, the printer may have a problem. Check the other solutions in this
manual. If they do not work, contact Epson.
Parent topic: Solving Problems
Related concepts
Print Head Alignment
Print Head Cleaning
When to Uninstall Your Product Software
Related references
Where to Get Help
power button to turn the product back on. Hold
power light begins to flash, then release the buttons.
74