Cleaning The Print Head Using A Computer Utility - Epson WorkForce WF-M1030 User Manual

The power light flashes throughout the cleaning cycle and stays on when the cleaning cycle is
finished.
Caution: Never turn off the product during a cleaning cycle or you may damage it.
4. Run a nozzle check to confirm that the print head is clean.
If you don't see any improvement after cleaning the print head up to 4 times, turn off the product and wait
at least 6 hours. Then try cleaning the print head again. If quality still does not improve, the ink cartridge
may be old or damaged and needs to be replaced.
Parent topic:
Related concepts
Print Head Nozzle Check
Related topics
Replacing the Ink Cartridge

Cleaning the Print Head Using a Computer Utility

You can clean the print head using a utility on your Windows or Mac computer.
1. Make sure no product lights are indicating errors.
2. Load a few sheets of plain paper in the product.
Print Head Cleaning
62