Enlarging Or Reducing Copies - Brother MFC-J470DW Advanced User's Manual

f
If you do not want to change additional
settings, press Mono Start or
Colour Start.

Enlarging or reducing copies

You can choose an enlargement or reduction
ratio. If you choose Fit to Page, your
machine will adjust to the size you set in
Paper Size.
a
Load your document.
b
(MFC models)
Press (COPY).
c
Enter the number of copies you want.
d
Press a or b to choose
Enlarge/Reduce.
Press OK.
e
Press a or b to choose the available
options.
f
Do one of the following:
 If you chose Enlarge or Reduce,
press OK and press a or b to choose
the enlargement or reduction ratio
you want.
Press OK.
 If you chose Custom(25-400%),
press OK and then enter an
enlargement or reduction ratio from
25% to 400%.
Press OK.
 If you chose 100% or Fit to Page,
press OK.
198% 10x15cmiA4
186% 10x15cmiLTR
141% A5iA4
100%
7
97% LTRiA4
93% A4iLTR
83% (DCP model)
83% LGLiA4 (MFC models)
69% A4iA5
47% A4i10x15cm
Fit to Page
Custom(25-400%)
g
If you do not want to change additional
settings, press Mono Start or
Colour Start.
NOTE
• Page Layout is not available with
Enlarge/Reduce.
• Page Layout, 2-sided Copy
and Remove Background are not
available with Fit to Page.
• Fit to Page does not work correctly
when the document on the scanner glass
is skewed more than 3 degrees. Using the
document guidelines on the left and top,
place your document in the upper-left
corner, with the document face down on
the scanner glass.
• Fit to Page is not available when
using the ADF
• Fit to Page is not available for Legal
sized documents.
1
MFC models only
Making copies
1
, Sort
1
.
7
25