Enlarging Or Reducing Copies - Brother MFC-J245 User Manual

Enlarging or reducing copies

You can choose an enlargement or reduction
ratio. If you choose Fit to Page, your
machine will adjust to the size you set in
Paper Size.
(MFC-J245)
a
Load your document.
b
Press (COPY).
c
Enter the number of copies you want.
d
Press Copy Options and a or b to
choose Enlarge/Reduce.
Press OK.
e
Press a or b to choose the enlargement
or reduction ratio you want.
Press OK.
NOTE
If you chose Custom(25-400%), enter
an enlargement or reduction ratio from
25% to 400%.
198% 10x15cmiA4
186%10x15cmiLTR
141% A5iA4
100%
97% LTRiA4
93% A4iLTR
83% LGLiA4
69% A4iA5
47% A4i10x15cm
Fit to Page
Custom(25-400%)
f
If you do not want to change additional
settings, press Mono Start or
Colour Start.
(DCP-J132W)
7
a
Load your document.
b
Enter the number of copies you want.
c
Press Enlarge/Reduce.
d
Press a or b to choose the enlargement
7
or reduction ratio you want. Press OK.
NOTE
If you chose Custom(25-400%), press a
or b repeatedly to enter an enlargement or
reduction ratio from 25% to 400%.
198% 10x15cmiA4
186%10x15cmiLTR
141% A5iA4
100%
97% LTRiA4
93% A4iLTR
83%
69% A4iA5
47% A4i10x15cm
Fit to Page
Custom(25-400%)
e
Press Mono Start or Colour Start.
NOTE
• Page Layout is not available with
Enlarge/Reduce - MFC-J245
(Enlarge/Reduce - DCP-J132W).
• Page Layout, Sort and
Remove Bkg. Clr are not available with
Fit to Page.
• Fit to Page does not work correctly
when the document on the scanner glass
is skewed by more than 3 degrees. Using
the document guidelines on the left and
top, place your document in the upper-left
corner, with the document face down on
the scanner glass.
• Fit to Page is not available when
using the ADF
1
MFC models only
Making copies
1
.
7
7
23