Connect The Network Cable; For Wired Network Interface Users - Brother MFC-J4410DW Quick Setup Manual

Wired Network

For wired network interface users

®
(Windows XP Home/XP Professional/Windows Vista
17
Before you install
Make sure that your computer is ON and you are
logged on with Administrator rights.
IMPORTANT
If there are any programs running, close them.
NOTE
• The screens may differ depending on your
operating system.
• The CD-ROM includes Nuance™ PaperPort™
12SE. This software supports Windows
Home (SP3 or greater), XP Professional (SP3
or greater), XP Professional x64 Edition (SP2
or greater), Windows Vista
®
and Windows 7. Update to the latest
®
Windows Service Pack before installing
MFL-Pro Suite.
• If you have previously set up your machine for
a wireless network and then want to set it up on
a wired network, you should check that the
machine's Network I/F is set to
Wired LAN. The wireless network interface
will become inactive with this setting.
On your machine, press Settings.
Press s or t to display Network.
Press Network.
Press s or t to display Network I/F.
Press Network I/F.
Press Wired LAN.
Press .
18
®
XP
®
(SP2 or greater)
® ®
/Windows 7)
18
Connect the network
cable
a
Lift the scanner cover until it locks securely into
the open position.
b
Connect the network cable to the Ethernet port
marked with a
Ethernet port inside the machine on the left, as
shown in the callout below. Remove the orange
protective cap before connecting the cable.
1
®
Windows
symbol a. You will find the