Storing Speed Dial Numbers - Lanier e2004 Basic Features

Storing Speed Dial Numbers

If you store numbers in Speed Dials,
you can specify the fax number simply
by pressing the {Speed Dial} key, and en-
tering a two-digit Speed Dial number.
The following procedure describes
how to store fax numbers in Speed
Dials.
Note
The combined total number of
Speed Dial numbers that can be
stored is 100.
You can specify numbers from 00 to 99.
The maximum number of digits
per fax number is 254.
The maximum number of charac-
ters per name is 20.
You can confirm the contents of
Speed Dial numbers in the Speed
Dial list. (See Chapter 6, "Printing
Dial Lists" in the Advanced Fea-
tures manual.)
A
Press the {User Tools} key.
User Tools Main Menu
1.Program / Deletehi
Confirm that "1. Program / Delete"
is displayed.
B
Press the {OK} key.
C
Press 0 or 1 to display "3. Prog.
Speed Dial".
Program / Delete:
3.Prog. Speed Dialhi
D
Press the {OK} key.
Enter No.to Program
[b_k] (Browsehi)
Storing and Editing Fax Numbers
E
Display the number of the Speed
Dial you want to store (00 to 99).
Enter the Speed Dial number with
the number keys, or search using
0 or 1.
b01
_kkkkkkkkkkkkkkkkkkk
Note
If you want to delete a digit of
the number, press the {Clear}
key and enter the correct num-
ber.
If a Speed Dial number has al-
ready been stored, the contents
are displayed. Press 0 or 1 to
select an unprogrammed num-
ber, then press the {OK} key.
F
Enter the fax number with the
number keys.
b00
5432109876_kkkkkkkkk
Note
If you want to delete a digit of
the number, press the {Clear}
key.
G
Press the {OK} key.
The fax number is programmed.
b00[ABC]
_kkkkkkkkkkkkkkkkkkk
H
Enter the name.
b00[ABC]
DEF COMPANY_kkkkkkkk
Fax No.
Press OK
Name
OK
33
3