Table of Contents
Advertisement
Troubleshooting
Error Messages
The following messages may appear while you are operating or programming
the machine.
Reference
See Chapter 6, "Error Messages" in the NIC FAX KIT manual for network er-
rors that may occur when using Internet Fax.
Message
No Files Exist
4
Cannot Combine:(cur-
rently selected func-
tion)
This Key is in Use as a
Group Dial
This Key is in Use as a
Program
This Key is in Use as a
Quick Dial
This Key is Not Pro-
grammed
This Speed Dial No. is
Not Programmed
This Dest. is Already
Selected
Insert Pause "_" After
Area Code
Replace Toner
Clear Misfed Orig.
Clear Misfed Paper
Close Front Cover
Close Rear Cover
Machine is in Use.
Please Wait.
60
Problem/Solution
No polling reception operations have been programmed.
There are no documents in memory waiting for transmis-
sion.
Incorrect file number. Check the file number and try again.
Appears when you attempt to select a function that cannot
be used in combination with another currently selected
function.
This Quick Dial Key has a Group stored in it.
This Quick Dial Key has a Keystroke Program stored in it.
This Quick Dial Key has a Quick Dial stored in it.
Either:
• This Quick Dial Key does not contain a number.
• This Quick Dial Key does not contain a Keystroke Pro-
gram.
This Speed Dial number does not contain a number.
Either:
• This number is already included in this Group.
• The same destination was specified more than once.
You must add a pause after your area code when you input
your fax terminal's own telephone number.
The toner cassette is empty. Install a new cassette.
A document is jammed in the feeder.
Paper is jammed in the printer.
A cover is not closed properly. Check that all covers are
closed.
Machine cannot print a list/file, because the plotter is not
ready.
Advertisement
Table of Contents
