Honda 00X31-TK8-8200 Manual page 73

Illumination
Priority
control
a button
1 Selects Day, Night, or Off display mode. This button has
the highest priority and overrides all other display control
adjustments listed below.
Remember: Once you press this button, you assume full
manual control of the display mode until the power mode
is set to VEHICLE OFF (LOCK).
Sunlight sensor 2 If the sunlight sensor detects daylight and the headlights
(see your are turned on, the system automatically overrides the
Owner's Manual Night display and displays the Day display mode.
Remember: If desired, use the a button to override
for location)
this automatic choice.
Dash illumination 3 When headlights are turned on, and you wish to have the
adjustment Day display mode, adjust the illumination to the full
buttons (see your brightness setting (beeps).
Owner's Manual Remember: Adjust the dash brightness back to mid-range
for location) to allow auto switching by sensing the headlights are on or
off.
Headlights 4 When turned on, the display changes to Night display
(Auto/On/Off) mode. The previous three controls listed above can
"cancel" this function.
Remember: Use the a button, or adjust the dash
illumination to full brightness, to set the display to your
desired choice.
Screen color N/A The user can select the color of the screen that will be
choice displayed for the Day and Night display modes described
above.
Remember: For best contrast, ensure that the map color is
white for Day and black for Night.
Operation
MapColor
71