Troubleshooting; Map, Voice, Entering Destinations - Honda 00X31-TK8-8200 Manual

Troubleshooting

Map, Voice, Entering Destinations

The Startup Confirmation screen is displayed every
time I start the car.
The navigation system reboots by itself (returns to the
opening screen).
How do I specify a destination when an entered city or
street could not be found?
Why do some letters become grayed out when I enter
an address?
How do I delete Personal Addresses, Previous
Destinations, or the Home Address?
I cannot hear the navigation system voice.
The voice control system is having difficulty
recognizing my voice commands.
I cannot give voice commands.
280
Problem
This is normal. The Startup Confirmation screen reminds you and your guest drivers to
always operate the navigation system in a safe manner. The Startup Confirmation
screen goes off after a certain period of time and the top screen of the last mode is
displayed.
A reboot can be caused by extreme temperatures or shock from bumpy roads, and
does not necessarily indicate a problem. If this happens frequently, please see a dealer.
• Try entering the street first. Some cities are lumped in with a major metro area. In
rural "unverified" areas or new subdivisions, streets may be missing or only partially
numbered.
• Try selecting the destination directly from the map.
P. 105
2 Map Input
As you enter each letter in an address or a place/landmark, the navigation system
looks in the database to see what letters are possible and grays out letters that do not
apply.
1. Press the SETTINGS button. Select Navi Settings > Personal Info to display the
types of information.
2. Select the type of address to delete.
3. Select Delete.
1. Press the SETTINGS button. Select System Settings and check that Volume is not
set to 0.
2. Select Voice Rec. and set Voice Prompt to On.
• Check that the vents are not blowing air onto the microphone on the ceiling, the
vehicle is as quiet as possible, and you are using the correct command when
speaking.
2 Voice Recognition P. 23
• Say d "Voice Help" on any screen to see a list of the applicable voice commands.
Make sure you selected OK at the Startup Confirmation screen.
2 Start-up P. 20
Solution