Honda 00X31-TK8-8200 Manual page 281

Problem
I cannot select an option using the Interface Dial.
The navigation system pronunciation of street names
in the guidance command or destination address
sounds strange.
The screen is bright when I drive at night.
The screen is dark when I drive during the day.
How do I change or remove my PIN?
I have forgotten my PIN. How do I reset the PIN for
Home or the PIN for personal addresses?
Why is Call grayed out on the Calculate Route screen? Your phone is not paired to Bluetooth® HandsFreeLink® or, if paired, your phone is in
To reduce potential driver distraction, certain onscreen functions and features are
limited or inoperable while the vehicle is moving. Use voice commands or pull over to
proceed.
The basic guidance phrases use a studio-recorded voice, but street names are
pronounced using a machine-generated voice. Consequently, the name may be
mispronounced or sound strange at times.
1. Check that the nighttime dashboard brightness control is not set to maximum.
2. Press the SETTINGS button. Select Navi Settings > Map > Color (Night). Set the
Night color to Black for the best contrast.
2 Switching Display Mode Manually
Press the SETTINGS button. Select Navi Settings > Map > Color (Day). Set the Day
color to White for the best contrast.
2 Switching Display Mode Manually
1. Press the SETTINGS button. Select Navi Settings > Personal Info > PIN Number >
Address Book PIN or Go Home PIN.
2. Enter your existing PIN. You then have the choice to change or remove the PIN.
P. 43
2 PIN Numbers
A dealer must reset the PIN for you.
use.
2 Bluetooth® HandsFreeLink®
TroubleshootingMap, Voice, Entering Destinations
Solution
P. 70
P. 70
P. 204
281