Replacement Parts.
For 40 and 50 gallon models using natural or LP gas.
Rubber
Coupling
Blower
Assembly
** Heat
Trap
Nipple
Anode rod
Flammable Vapor Sensor
*Burner Access Door Gasket
*Burner orifice
*Spark Igniter Assembly
Instructions For Placing a Parts Order
All parts orders should include:
The model and serial number of the
water heater from the rating plate.
Specify type of gas (natural or LP)
as marked on the rating plate.
** Heat Trap Nipple
Flue baffle and hanger
Dip tube
Dip tube gasket
Temperature and
pressure relief valve
Drain valve
Gas Control (Thermostat)
*Burner
*Burner Access Door
Part description (as noted below)
and number of parts desired.
CAUTION: For your safety, DO
NOT attempt repair of gas piping,
gas control (thermostat), burners,
vent connectors or other safety
devices. Refer repairs to qualified
service personnel.
*Burner Assembly Kit
The kit provides extra speed
clips and tamper resistant
screws.
** May differ in actual appearance.
*Pilot supply tube
*Burner supply tube
*Spark Igniter Wire
*Sight Glass
Jacket Door
*Burner Access Door Grommet
31