PARTS PROVIDED
Locate the parts packed with the Water Heater.
Gas Valve 3/4" FNPT Ball Valve
TOOLS YOU WILL NEED
• Pipe Wrenches (2)
• Adjustable Pliers
• Screwdrivers (2)
• Wire Cutters
MATERIALS YOU WILL NEED TO SUPPLY
• Soap Solution
• Pipe Compound
• Approved Venting
• 5/8" ID PVC Flexible
Tubing
• 2 Conductor 22 AWG Wire for Remote Control
• Single Gang Electrical Box
• Wire Nuts
• Concrete Wall Anchors (Optional)
Your installation components may vary.
Installation Instructions
• Gloves
• Safety Glasses
• Pipe Fittings Required:
– Unions
– Ball Valves
– Drain Valves
– Pressure Relief Valve
OTHER TOOLS THAT MIGHT BE REQUIRED
• Hammer Drill with Concrete Bits
• Saw
• Threading Machine with Heads and Oiler
• Core Drill with Diamond Head
• Torch Set
• Copper Tubing Cutter
• Steel Pipe Cutter
OTHER MATERIALS THAT MIGHT BE NEEDED
• Heat Tape
• Pipe Insulation
• Electrical Wire and Conduit per Local Code
• Air Inlet Screen
• Optional Pipe Cover AGTPCM
• Optional Remote Controller AGTRC1
3
4 #10 x 1
1
⁄
"
4
Wood Screws