Table of Contents
Advertisement
PLAYBACK
Useful Functions in Tape Operation
These functions will help your playback.
VCR
TV
POWER
1
2
3
4
5
6
CM SKIP
7
8
9
A.SELECT
0
100
ENTER
EJECT
PLAY
PLAY
REW
FF
F F
FF
ENTER
REW
STOP
STOP
SLOW
PAUSE/STILL
REMAIN/
COUNT
DISPLAY
COUNTER
RESET
SP/ SLP
REC
TIMER
I.SELECT
COUNT RESET
TV VOL
PROG.
CANCEL
PROG.
REMAIN/
COUNTER
DISPLAY
22
W522CG ENG new(20-23)
Counter Function
You can view the clock, linear time counter or tape remaining
time in the VCR display or on the TV screen.
Each time you press REMAIN/COUNTER, the VCR display
changes in sequence as follows:
→ Linear time counter → Tape remaining time (R) → Clock
The indication above will also appear on the TV screen by pressing
DISPLAY . They are switchable with REMAIN/COUNTER.
To reset the linear time counter to "0:00:00"
The counter is automatically reset to "0:00:00" when a cassette is
ejected. If you want to reset at another point, such as the beginning of
a new recording, just press COUNT RESET.
Notes
• The linear time counter does not work on non-recorded portions on the
tape.
• When the tape is ejected or the VCR is turned off, the display changes to
clock.
• If the tape rewinds back over "00:00", "–" appears in the VCR display.
• The displayed time of the linear time counter is only an approximation.
Tape Remaining Time
To view the tape remaining time in the VCR display, select the
tape length beforehand.
1
Turn on the VCR and load a cassette.
2
Press PROG. to display the MENU screen.
3
Select "SET UP" using FF or REW, and press ENTER.
4
Select the length of the tape, using
FF or REW.
T120: for a T-120 tape or shorter
T160: for a T-140 or T-160 tape
T180: for a T-180 tape
5
Press PROG. to exit.
6
Press REMAIN/COUNTER.
The remaining time ("R - : - -") appears in the VCR display.
Notes
• The displayed remaining time is an approximation.
• The remaining time is calculated according to the tape speed (SP or SLP)
and the cassette type.
22
2/20/04, 11:18
Hide quick links:
Advertisement
Table of Contents
