Initial Settings Using On-Screen Display; Setting The Language; Setting The Vcr Output Channel; Optional Settings On The Setup Screen - Toshiba W522CG Owner's Manual

PREPARATION

Initial Settings Using On-screen Display

The language selection and clock setting must be set first when VCR is first plugged in or after it
encounters a power failure.
Preparation
• Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video
connection (page 11).
• Press VCR to set the remote control operating the VCR.
VCR
VCR TV
POWER
POWER
1 2 3
4 5 6
CM SKIP
7 8 9
A.SELECT
0 100
REW
EJECT
PLAY
FF
REW F F
ENTER
PLAY, STOP
STOP
SLOW PAUSE/STILL
REMAIN/
COUNT
DISPLAY RESET SP/ SLP
COUNTER
ENTER
I.SELECT REC TIMER
TV VOL PROG. CANCEL
PROG.

Setting the VCR Output Channel

1
Press PROG..
2
Select SET UP using FF or REW and press ENTER.
3
Select the VCR OUTPUT using PLAY or STOP and set VCR
output channel using FF or REW.
4
Press PROG. to exit.
A message will appear indicating the VCR output channel is changed.
Optional settings on the SET UP screen
Other optional settings can be made. Press ENTER while "SET UP" is
selected on the MENU screen. The screen turns to the SET UP screen.
To exit, press PROG. once.
14
W522CG ENG new (10-19)

Setting the Language

1
Press POWER to turn on the VCR.
2
Press PROG..
The following screen appears on the TV.
3
Select the language using PLAY or
STOP and press PROG..
The screen turns to the MENU screen.
4
Press PROG. to return to the normal TV screen.
Page 14
Page 22
Page 28
Page 23
To change the language, move down here and set to the desired one.
14 2/20/04, 11:16