Table of Contents
Advertisement
PLAYBACK
Useful Functions in Tape Operation
These functions will help your playback.
POWER
VCR
TV
CH/TRK
REMAIN/
1
2
3
COUNTER
4
5
6
TV VOL
COUNT RESET
7
8
9
I.SELECT
0
100
REMAIN/
DISPLAY
COUNT RESET
COUNTER
TV/ VCR
DISPLAY
REC
TIMER
SP/ SLP
PLAY/x2,
PLAY/x2
SLOW
PAUSE/STILL
STOP
CURSOR
REW
F F
FF
STOP
REW
PROG.
CANCEL
ENTER
ENTER
CABLE BOX
CH
VCR Plus+
A.SELECT
CM SKIP
POWER
EJECT
PROG.
22
Counter Function
You can view the clock, linear time counter or tape remaining
time in the VCR display or on the TV screen.
Each time you press REMAIN/COUNTER , the VCR display
changes in sequence as follows:
Linear time counter
The indication above will also appear on the TV screen by pressing
DISPLAY . They are switchable with REMAIN/COUNTER .
To reset the linear time counter to "0:00:00"
The counter is automatically reset to "0:00:00" when a cassette is
ejected. If you want to reset at another point, such as the beginning of a
new recording, just press COUNT RESET .
Notes
• The linear time counter does not work on non-recorded portions on the tape.
• When the tape is ejected or the VCR is turned off, the display changes to
clock.
• If the tape rewinds back over "0:00:00", "–" appears in the VCR display.
• The displayed time of the linear time counter is only an approximation.
Tape Remaining Time
To view the tape remaining time in the VCR display, select the
tape length beforehand.
1
Turn on the VCR and load a cassette.
2
Press PROG. to display the MENU screen.
3
Select "SET UP" using FF or REW , and press ENTER .
4
Select the length of the tape, using
FF or REW .
T120: for a T-120 tape or shorter
T160: for a T-140 or T-160 tape
T180: for a T-180 tape
5
Press PROG. once to exit.
6
Press REMAIN/COUNTER .
The remaining time ("R - : - -") appears in the VCR display.
Notes
• The displayed remaining time is an approximation.
• The remaining time is calculated according to the tape speed (SP or SLP)
and the cassette type.
Tape remaining time (R)
Clock
n
E
D : PROG
Advertisement
Table of Contents
