Canon EOS 70D(W) Instruction Manual page 69

Entering the Wireless LAN Encryption Key
Go to the next page when the [IP address set.] screen is displayed.
Set the encryption key specified for the access point. For details on the
specified encryption key, refer to the access point's instruction manual.
Note that the screens displayed in steps 1 to 3 below vary depending on
the authentication and encryption specified for the access point.
Manual Connection by Searching Networks
1
The [Key index] screen is displayed
only if WEP encryption is used by the
access point.
Press the <V> key to select the key
index number specified for the access
point, then press <0>.
Select [OK] and press <0> to go to
the next screen.
2
Press the <V> key to select the
format and the number of characters
used for the key, then press <0>.
Select [OK] and press <0> to go to
the next screen.
3
Enter the encryption key using the
virtual keyboard (p.14).
The [IP address set.] screen (p.70)
will be displayed.
69