Canon EOS 70D(W) Instruction Manual page 64

Easy Connection via WPS (PIN Mode)
[Auto setting]
Configures the settings available in [Manual setting] automatically.
However, this option can only be used in environments using DHCP
servers, or access points or routers with DHCP server functionality,
such that IP addresses and related settings are assigned and
configured automatically.
Select [OK] and press <0> to display the setting screen for the
communication method (p.65).
If an error is displayed even though the IP address and related
settings is set to be automatically assigned and configured, select
[Manual setting].
[Manual setting]
If [Auto setting] results in an error, enter the IP address manually.
Enter the IP address assigned to the camera when prompted for the IP
address.
Select [OK] and then select an item on the screen displayed. When
finished, press <0>.
When entering numbers, turn the <6>
dial to move the input position in the
upper area and turn the <5> dial to
select the number. Press <0> to enter
the selected number. When you have
finished entering information, press the
<M> button. A confirmation screen
is not displayed.
When you have completed setting all items, select [OK] and press
<0>. The setting screen for the communication method will be
displayed (p.65).
If you are not sure what to enter, see "Checking Network Settings"
(p.166), or ask the network administrator or another person
knowledgeable about the network.
64