Preparation; Configuring Settings To Use Web Services - Canon EOS 70D(W) Instruction Manual

Preparation

Signing Up as a CANON iMAGE GATEWAY Member
To send images to Web services, you need to sign up as a CANON
iMAGE GATEWAY member (free of charge).
Once you are a CANON iMAGE GATEWAY member, you can publish
photos you took in online albums and use a range of services. This Web
site also serves as a bridge to send images wirelessly from the camera
or for sending links to the online albums. Connect to the Internet from a
computer or other device, access the CANON iMAGE GATEWAY site
for the area you live in from the Canon Web site (http://canon.com/cig)
and register as a member by following the instructions.
If you also intend to use Web services other than CANON iMAGE
GATEWAY, you must have an account with the services you intend to
use. For details, consult each individual Web service's Web site.

Configuring Settings to Use Web Services

Start EOS Utility on the computer, log in to CANON iMAGE GATEWAY,
then configure the camera's settings to enable access to Web services.
For details, refer to the EOS Utility instruction manual (CD-ROM).
To use CANON iMAGE GATEWAY, you must be able to connect to the
Internet. (An account with an internet service provider is necessary,
browser software needs to be installed, and a line connection must be
completed.)
For information on browser (e.g. Microsoft Internet Explorer) versions
and settings required to access CANON iMAGE GATEWAY, check
CANON iMAGE GATEWAY.
Fees to connect to your provider and communication fees to access your
provider's access point are charged separately.
104