Options - A&D FZ-300CT Instruction Manual

Note
The FXi-02, FXi-08 and FXi-09 can not be used at the same time.
FXi-02 USB interface (Installed in the balance, Applicable OS: Windows 98 OSR2 or later)
Used to transmit the balance weight data (numerical
value only) uni-directionally to a personal computer via
USB.
Can transmit the balance weight data (numerical value
only) directly to other application software such as
Microsoft Excel, Word and memo pad.
Driver installation is not necessary.
Use the USB converter (AX-USB-9P) to perform
bi-directional communication using the WinCT or to
output the statistical results or GLP report to a personal
computer.
FXi-08 Ethernet interface
Used to connect the balance to a LAN.
The "WinCT-Plus" data communication software is
provided as an accessory and can perform the
following.
Acquire data from multiple balances connected to a
LAN.
Control these balances with commands.
Acquire data transmitted from balances.
Example: When pressing the PRINT key of the balance,
data is output and is acquired by the computer.
The stored data can be used with Microsoft Excel (if
installed).
FXi-09 Built-in battery unit (Ni-MH rechargeable battery pack)
Charging time: Approx. 10 hours
Continuous operation hours: Approx. 8 hours
Note
The charging time varies depending on the operating conditions. The balance can not be
used while the battery is being charged.

18. OPTIONS

66
FX i –02 Example of use
FX i –08 Example of use