Beeper Volume; Speaker Volume - Brother MFC-J450DW User Manual

Chapter 1

Beeper Volume

When the beeper is on, the machine will
make a sound when you press a key, make a
mistake, or after you send or receive a fax.
You can choose a range of sound volume
levels, from High to Off.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Volume.
Press OK.
d
Press a or b to choose Beeper.
Press OK.
e
Press a or b to choose Low, Med, High
or Off.
Press OK.
f
Press Stop/Exit.
2

Speaker Volume

1
You can choose a range of speaker volume
levels, from High to Off.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Volume.
Press OK.
d
Press a or b to choose Speaker.
Press OK.
e
Press a or b to choose Low, Med, High
or Off.
Press OK.
f
Press Stop/Exit.
You can also adjust the speaker volume by
pressing Hook.
a
Press Hook.
b
Press d or c
Each key press changes the volume to
the next setting. This setting will stay
until you change it again.
c
Press Hook.
1
.