JVC AV-20N3 Service Manual page 27

Hide thumbs Also See for AV-20N3:
Table of Contents

Advertisement

DEFLECTION CIRCUIT ADJUSTMENT
" There are 2 modes of adjustment (s etting value) ------ ① 50Hz mode and ② 60Hz mode ----- depending upon the kind of s ignals
(vertic al frequency 50Hz / 60Hz).
" When adjusted in mode ① , mode ② will be automatically s et.
The setting (adjustmen t) usin g the REMOTE CONTROL UNIT is made on the basis of the initial setting values.
The setting values which adjust the screen to the optimum condition can be differ ent fr om the initial settin g values.
Measuring
Item
instrument
Ad justment
Signal
gener ator
of V.HEIGHT
&
Remote
V.POSITION
control unit
SUB MENU 3. DEF
DEF
1. VER. POSITION
50Hz
/
:SELECT
- / + : OPERATE
Scre en size
Scre en
size
92%
Picture size 1 00%
Ad justment
Signal
gener ator
of HOR.
POSITION
Remote
control unit
H
Test point
Ad justment part
1. VER. POSITION
3. VER. HEIGHT
PAL
***
DISP : EXIT
Picture
size
10 0%
Fig.1
2.HOR. POSITION
H"
V
V'
Fig.2
1. Input a circle pattern signal.
2. Enter the SERVICE MENU.
3. Select 3. DEF. from SERVICE MENU.
4. Select 1. VER. POSITION with the MENU ▼ / ▲ key.
5. Set the initial setting value with the MENU - / + key.
6. Adjust V and V' to be equal with the MENU - / + key as s hown in
Fig.2.
7. Input a cross -hatch signal.
8. Select 3. V. HEIGHT with the MENU ▼ / ▲ key.
9. Set the initial setting value with the MENU - / + key.
10. As s hown in Fig.1, adjust VER. HEIGHT and mak e the vertical
92%
screen size
of the picture size with the MENU - / + keys of
remote control unit.
11. Input a circle pattern signal.
12. Select 2. HOR POSITION with the MENU ▼ / ▲ key.
13. Set the initial setting value of 2. HOR. POSITION with the
MENU - / + key.
14. Adjust 2. HOR. POSITION to make H=H" as shown in Fig.2
with the MENU - / + key.
No. 52025
AV-20NMG3
AV-20NMG3B
Description
AV-20N3
27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Av-20nmg3/-aAv-20n3/dAv-20nmg3Av-20nmg3b

Table of Contents