Cycle Options; Other Features - GE Profile WPRB9250 Owner's Manual

About cycle options.
About other features.
SIGNAL
Alerts you when the cycle is complete.
Press SIGNAL to select low, medium or high volume, or to turn the beeper off.
2ND RINSE
Adds a second cold rinse to any cycle.
WARM RINSE
Changes the final rinse of a wash cycle from a cold to a warm rinse.
DELAY START
Use to delay the start of your washer.
Choose your wash cycle and any options.
1
Press DELAY START. You can change the delay time in 30 minute increments by one
2
of the following methods, depending on the model:
I
Using the arrow pads beneath the Time Remaining display
I
Repeatedly pressing the DELAY START pad until the desired time is shown
Press the START pad to start the countdown.
3
The countdown time will be shown in the Time Remaining display.
Cycle Status Indicators
On some models, cycle status indicator lights show what part of the cycle the washer
is in. On models without indicator lights, the cycle status will show in the display.
PerfecTemp Plus
PerfecTemp Plus senses the incoming water temperature and adjusts the temperature
of the fill water to meet the clothing manufacturer's recommendations.
The lid must be closed for PerfecTemp Plus to work.
If your incoming water is too cold, detergent will not dissolve effectively and clothes
may not get clean. If the water is too hot, fabrics could be damaged.
PerfecTemp Plus adjusts these water temperature extremes for better washing
performance.
You may hear the water valves turning off and on while the water temperature is being
adjusted. This is normal.
www.GEAppliances.com
11