GE Profile WPRB9250 Owner's Manual page 8

About Clothes Care Cycles.
8
PRESOAK
To presoak a load and go straight into a wash cycle:
Select your wash cycle, press the PRESOAK pad, then press the START pad.
I
Each time you press PRESOAK, you will add three minutes of agitation, followed by
12 minutes of soaking, for up to an hour of additional time. After the final soak
period, the selected wash cycle begins.
I
Uses the speed and water temperature of your selected wash cycle.
QUICK RINSE
Use this feature to quickly rinse chlorine, perspiration, stains, etc. out of clothes.
I
The washer fills with water, agitates for three minutes, drains and spins. You may
change the automatic settings if desired.
On some models, QUICK RINSE is found under the WASH CYCLES menu.
SPEED WASH
For lightly soiled items that are needed in a hurry. Cycle time is approximately
20 minutes, depending on your household water pressure.
SOIL LEVEL
The SOIL LEVEL setting determines the amount of agitation time.
The highest SOIL LEVEL is the Stain Wash cycle, which adds a 30 minute soak and
agitation at the beginning of the selected wash cycle.