1. Manuals
  2. Brands
  3. Aaeon Manuals
  4. Motherboard
  5. Compact Board PCM-9452
  6. Manual

Aaeon Compact Board PCM-9452 Manual

Compact board intel coretm 2 duo/ core duo, celeron m (yonah) processors, two ddr 400/533/667 ddr ii sodimm, 18-bit dual-channel lvds tft lcd, 6 usb 2.0 / 4 coms / digital io
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
C o m p a c t B o a r d
P C M - 9 4 5 2
PCM-9452
®
TM
TM
Intel
Core
2 Duo/ Core
Duo/
®
Celeron
M (Yonah) Processors
Two DDR 400/533/667 DDR II SODIMM
18-bit Dual-Channel LVDS TFT LCD
6 USB 2.0 / 4 COMs / Digital IO
PCM-9452 Manual Rev.A 2nd Ed.
Mar. 2008

Advertisement

Table of Contents
loading

Related Manuals for Aaeon Compact Board PCM-9452

Summary of Contents for Aaeon Compact Board PCM-9452

  • Page 1 C o m p a c t B o a r d P C M - 9 4 5 2 PCM-9452 ® Intel Core 2 Duo/ Core Duo/ ® Celeron M (Yonah) Processors Two DDR 400/533/667 DDR II SODIMM 18-bit Dual-Channel LVDS TFT LCD 6 USB 2.0 / 4 COMs / Digital IO...

  • Page 2: Copyright Notice

    C o m p a c t B o a r d P C M - 9 4 5 2 Copyright Notice This document is copyrighted, 2008. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice.
  • Page 3 Intel , Core 2 Duo, Core Duo, and Celeron M are ® trademarks of Intel Corporation. ® Microsoft Windows is a registered trademark of Microsoft Corp. ITE is a trademark of Integrated Technology Express, Inc. IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines Corporation.

  • Page 4: Packing List

    C o m p a c t B o a r d P C M - 9 4 5 2 Packing List Before you begin installing your card, please make sure that the following materials have been shipped: • 1 9657666600 Jumper Cap •...

  • Page 5: Table Of Contents

    C o m p a c t B o a r d P C M - 9 4 5 2 Contents Chapter 1 General Information 1.1 Introduction..............1-2 1.2 Features ..............1-3 1.3 Specifications ............1-4 Chapter 2 Quick Installation Guide 2.1 Safety Precautions ............
  • Page 6 C o m p a c t B o a r d P C M - 9 4 5 2 2.17 SATA 2 Connector (CN2)........2-13 2.18 System Fan Connector (CN3)......... 2-13 2.19 LVDS Connector (CN4)........... 2-13 2.20 ATX Power Connector (CN5)........2-14 2.21 RJ-45 Ethernet #1 Connector (CN6).......
  • Page 7 C o m p a c t B o a r d P C M - 9 4 5 2 2.41 IDE Connector (CN27) .......... 2-22 2.42 Keyboard/Mouse Connector (CN28) ..... 2-23 2.43 CPU Fan Connector (CN29) ......... 2-24 2.44 IrDA Connector (CN30) ......... 2-24 2.45 PCMCIA Slot (CN31) ..........

  • Page 8: Chapter 1 General Information

    C o m p a c t B o a r d P C M - 9 4 5 2 Chapter General Information 1- 1 Chapter 1 General Information...

  • Page 9: Introduction

    Memory support for up to 4GB of DDRII 400/533/667 is available through two 200-pin SODIMM sockets. Dual Ethernet ® connectivity is achieved by employing Intel 82573L 10/100/1000Base-TX Ethernet controllers. To meet demanding expansion requirements the PCM-9452 offers Mini PCI, PCI and PCI-Express[x16].

  • Page 10: Features

    C o m p a c t B o a r d P C M - 9 4 5 2 1.2 Features ® ® Intel Core 2 Duo/ Core Duo/ Celeron M (Yonah) Processors 18-bit Dual-Channel LVDS TFT LCD, TV-out...

  • Page 11: Specifications

    Duo/ Celeron M (Yonah) processors System Memory 200-pin SODIMM x 2, max. 4GB (DDR II 400/533/667) Chipset Intel 945GM + ICH7-M (-DH optional for RAID) I/O Chipset ICH7-M + ITE8712F-KX Ethernet Intel 82573L, 10/100/1000Base-TX, RJ-45 x 2, optional 10/100 LAN BIOS Award Plug &...
  • Page 12 1.2 lb (0.5kg) MTBF (Hours) 60,000 Display: Support CRT/LCD, CRT/TV, LCD/TV, simultaneous/ dual view display Chipset Intel 945GM Memory Shared system memory up to 224MB w/ DVMT3.0 Resolutions Up to 2048 x 1536 @32bpp for CRT; Up to 1280x1024@ 36bpp...
  • Page 13 C o m p a c t B o a r d P C M - 9 4 5 2 IrDA One IrDA Tx/Rx header Serial Port RS-232 x 3, RS-232/422/485 x 1 PS/2 Port Keyboard +Mouse x 1 Audio MIC-in/ Line-in/ Line-out,/ CD-in Stereo Amplifier included USB 2.0 Port x 6...

  • Page 14: Chapter 2 Quick Installation Guide

    C o m p a c t B o a r d P C M - 9 4 5 2 Chapter Quick Installation Guide Notice: The Quick Installation Guide is derived from Chapter 2 of the user manual. For other chapters and further installation instructions, please refer to the user manual CD-ROM that came with the product.

  • Page 15: Safety Precautions

    C o m p a c t B o a r d P C M - 9 4 5 2 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it. Do not make connections while the power is on, because a sudden rush of power can damage sensitive electronic components.

  • Page 16: Location Of Connectors And Jumpers

    C o m p a c t B o a r d P C M - 9 4 5 2 2.2 Location of Connectors and Jumpers Chapter 2 Quick Installation Guide...
  • Page 17 C o m p a c t B o a r d P C M - 9 4 5 2 Chapter 2 Quick Installation Guide...

  • Page 18: Mechanical Drawing

    C o m p a c t B o a r d P C M - 9 4 5 2 2.3 Mechanical Drawing Chapter 2 Quick Installation Guide...
  • Page 19 C o m p a c t B o a r d P C M - 9 4 5 2 10.00 129.02 125.32 72.52 67.02 8.60 33.66 5.08 0.00 Chapter 2 Quick Installation Guide...

  • Page 20: List Of Jumpers

    C o m p a c t B o a r d P C M - 9 4 5 2 2.4 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application. The table below shows the function of each of the board's jumpers: Label Function...

  • Page 21: List Of Connectors

    C o m p a c t B o a r d P C M - 9 4 5 2 2.5 List of Connectors The board has a number of connectors that allow you to configure your system to suit your application. The table below shows the function of each board's connectors: Label Function...
  • Page 22 C o m p a c t B o a r d P C M - 9 4 5 2 CN19 COM Port 2 Connector CN20 COM Port 3 Connector CN21 PCI Slot CN22 Digital I/O Connector CN23 USB Port 5,6 Connector CN24 USB Port 3,4 Connector CN25...

  • Page 23: Setting Jumpers

    C o m p a c t B o a r d P C M - 9 4 5 2 2.6 Setting Jumpers You configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.

  • Page 24: Lvds Operating Voltage Selection (Jp1)

    C o m p a c t B o a r d P C M - 9 4 5 2 2.7 LVDS Operating Voltage Selection (JP1) Function +3.3V (default) 2.8 ATX Power Supply Auto Turn-on Selection (JP3) Function Open Standard ATX Operating (default) Auto Turn-on (AT Power Supply Behavior) 2.9 LVDS Inverter Voltage Selection (JP4) Function...

  • Page 25: Front Panel (Jp7)

    C o m p a c t B o a r d P C M - 9 4 5 2 2.12 Front Panel (JP7) Function (-) 1-2 (+) ATX Power-on Button (-) 3-4 (+) HDD Active LED (-) 5-6 (+) External Speaker (-) 7-8 (+) Power LED / or CASEOPEN# ( Optional )

  • Page 26: Tv-Out Connector (Cn1)

    C o m p a c t B o a r d P C M - 9 4 5 2 2.16 TV-out Connector (CN1) Signal Signal CVBS Ground Ground Ground 2.17 SATA 2 Connector (CN2) Signal Ground TX2+ TX2- Ground RX2- RX2+ Ground...

  • Page 27: Atx Power Connector (Cn5)

    C o m p a c t B o a r d P C M - 9 4 5 2 TXLCLK# TXLCLK LCD Volt. Ground TXL0# TXL0 TXL1# TXL1 TXL2# TXL2 LVDS_DATA LVDS_CLK TXU0# TXU0 TXU1# TXU1 TXU2# TXU2 LCD Volt. Ground TXUCLK# TXUCLK...

  • Page 28: Ethernet#1 Connector (Cn6)

    C o m p a c t B o a r d P C M - 9 4 5 2 Ground -5 Volt. +5 Volt. +5 Volt. 2.21 RJ-45 Ethernet#1 Connector (CN6) Signal Signal MDI1_0+ / TXD+ MDI1_0- / TXD- MDI1_1+ / RXD+ MDI1_2+ MDI1_2-...

  • Page 29: Pin Header Ethernet #2 Connector (Cn9)(Optional)2-16

    C o m p a c t B o a r d P C M - 9 4 5 2 2.24 Pin Header Ethernet#2 Connector (CN9) (Optional) Signal Signal MDI2_0+ MDI2_0- MDI2_1+ MDI2_1- Ground Ground MDI2_2+ MDI2_2- MDI2_3+ MDI2_3- 2.25 SATA 0 Connector (CN10) Signal Ground TX0+...

  • Page 30: Com Port 4 Connector (Cn12)

    C o m p a c t B o a r d P C M - 9 4 5 2 Ground Ground 2.27 COM Port 4 Connector (CN12) Signal Signal DCDD DTRD Ground DSRD RTSD CTSD 2.28 CRT Display Connector (CN13) Signal Signal +5 Volt.

  • Page 31: Stereo Audio Output Connector (Cn15)

    C o m p a c t B o a r d P C M - 9 4 5 2 Ground Backlight Enable 2.30 Stereo Audio Output Connector (CN15) Signal Signal OUTA+ OUTA- OUTB+ OUTB- 2.31 Ethernet#1 LED Indicator (CN16) Signal Signal +3.3 Volt.

  • Page 32: Com Port 2 Connector (Cn19)

    C o m p a c t B o a r d P C M - 9 4 5 2 2.34 COM Port 2 Connector (CN19) COM2 RS-232 Mode Signal Signal DCDB DTRB Ground DSRB RTSB CTSB RIB / +5 Volt. / +12 Volt. COM2 RS-422 Mode Signal Signal...

  • Page 33: Com Port 3 Connector (Cn20)

    C o m p a c t B o a r d P C M - 9 4 5 2 2.35 COM Port 3 Connector (CN20) Signal Signal DCDC DTRC Ground DSRC RTSC CTSC 2.36 Digital I/O Connector (CN22) Signal Signal Port 1 Port 2...

  • Page 34: Usb Port 5,6 Connector (Cn23)

    C o m p a c t B o a r d P C M - 9 4 5 2 Port 2 CN22 Pin 2 Bit 1 U22 Pin 26 (GPIO 21) Port 1 CN22 Pin 1 Bit 0 U22 Pin 27 (GPIO 20) 2.37 USB Port 5,6 Connector (CN23) Signal Signal...

  • Page 35: Usb Port 1,2 Connector (Cn26)

    C o m p a c t B o a r d P C M - 9 4 5 2 PTD3 Ground PTD4 Ground PTD5 Ground PTD6 Ground PTD7 Ground ACK# Ground BUSY Ground Ground SLCT 2.40 USB Port 1,2 Connector (CN26) Signal Signal +5 Volt.

  • Page 36: Keyboard/Mouse Connector (Cn28)

    C o m p a c t B o a r d P C M - 9 4 5 2 Ground N/C / +5V for DOM optional DREQ Ground IOW# Ground IOR# Ground IORDY Ground DACK# Ground IRQ14 Cable Detect CS#1 CS#3 ACT#...

  • Page 37: Cpu Fan Connector (Cn29)

    C o m p a c t B o a r d P C M - 9 4 5 2 2.43 CPU FAN Connector (CN29) Signal Ground +5 Volt. / +12 Volt. (Optional) FAN Sense 2.44 IrDA Connector (CN30) Signal +5 Volt.
  • Page 38 C o m p a c t B o a r d P C M - 9 4 5 2 SDD4 SDD12 SDD5 SDD13 SDD6 SDD14 SDD7 SDD15 SDCS#1 SDCS#3 Ground Ground Ground SDIOR# Ground SDIOW# Ground +5 Volt. Ground IRQ15 +5 Volt.
  • Page 39 C o m p a c t B o a r d P C M - 9 4 5 2 Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Main Board/ Daughter Board/ Backplane 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚...

  • Page 40: Chapter 3 Award Bios Setup

    C o m p a c t B o a r d P C M - 9 4 5 2 Chapter Award BIOS Setup Chapter 3 Award BIOS Setup 3-1...
  • Page 41 C o m p a c t B o a r d P C M - 9 4 5 2 3.1 System Test and Initialization These routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the screen.
  • Page 42 C o m p a c t B o a r d P C M - 9 4 5 2 3.2 Award BIOS Setup Awards BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off.
  • Page 43 C o m p a c t B o a r d P C M - 9 4 5 2 PnP/PCI Configurations This entry appears if your system supports PnP/PCI. PC Health Status Use this menu to set PC Health Status. Frequency/Voltage Control Use this menu to specify your settings for auto detect DIMM/PCI clock and spread spectrum.
  • Page 44 C o m p a c t B o a r d P C M - 9 4 5 2 1.Display Properties--->Setting---> Advanced --->Monitor ==>Monitor settings - > uncheck <Hide modes that this monitor cannot display> 2. "Display Properties --> setting --> advanced --> adapter --> List All Mode".

  • Page 45: Chapter 4 Driver Installation

    C o m p a c t B o a r d P C M - 9 4 5 2 Chapter Driver Installation Chapter 4 Driver Installation...
  • Page 46 C o m p a c t B o a r d P C M - 9 4 5 2 The PCM-9452 comes with an AutoRun CD-ROM that contains all drivers and utilities that can help you to install the driver automatically.
  • Page 47 3. Follow the instructions that the window shows 4. The system will help you install the driver automatically Step 2 – Install VGA Driver 1. Click on the Step 2 –Intel Graphics Media Accelerator Driver folder 2. Choose the OS your system is 3.
  • Page 48 C o m p a c t B o a r d P C M - 9 4 5 2 5. The system will help you install the driver automatically Step 4 –Install Audio Driver 1. Click on the Step 4 –Realtek ALC 655 Audio Driver v3.71 folder 2.

  • Page 49: Appendix A Programming The Watchdog Timer

    C o m p a c t B o a r d P C M - 9 4 5 2 Appendix Programming the Watchdog Timer A - 1 Appendix A Programming the Watchdog Timer...

  • Page 50: Programming

    C o m p a c t B o a r d P C M - 9 4 5 2 A.1 Programming PCM-9452 utilizes ITE 8712 chipset as its watchdog timer controller. ( K version ) Below are the procedures to complete its configuration and the AAEON intial watchdog timer program is also attached based on which you can develop customized program to fit your application.
  • Page 51 C o m p a c t B o a r d P C M - 9 4 5 2 There are three steps to complete the configuration setup: (1) Enter the MB PnP Mode; (2) Modify the data of configuration registers;...
  • Page 52 C o m p a c t B o a r d P C M - 9 4 5 2 Configure Control (Index=02h) This register is write only. Its values are not sticky; that is to say, a hardware reset will automatically clear the bits, and does not require the software to clear them.

  • Page 53: Ite8712 Watchdog Timer Initial Program

    C o m p a c t B o a r d P C M - 9 4 5 2 WDT output through PWROK1/PWROK2 (pulse) enable note Select the interrupt level for WDT WatchDog Timer Time-out Value (LSB) Register (Index=73h, Default=00h) Description WDT Time-out value 7-0...
  • Page 54 C o m p a c t B o a r d P C M - 9 4 5 2 Watch_Dog_Setting: ;Timer setting mov al, cl mov cl, 73h call Superio_Set_Reg ;Clear by keyboard or mouse interrupt mov al, 0f0h mov cl, 71h call Superio_Set_Reg ;unit is second.
  • Page 55 C o m p a c t B o a r d P C M - 9 4 5 2 MOV DX,02Eh MOV CX,04h Init_1: MOV AL,BYTE PTR CS:[SI] OUT DX,AL INC SI LOOP Init_1 Enter_Configuration_Mode ENDP Exit_Configuration_Mode PROC NEAR MOV AX,0202h CALL Write_Configuration_Data Exit_Configuration_Mode ENDP...
  • Page 56 C o m p a c t B o a r d P C M - 9 4 5 2 CMP AL,12h JNE Not_Initial Need_Initial: Not_Initial: Check_Chip ENDP Read_Configuration_Data PROC NEAR MOV DX,WORD PTR CS:[Cfg_Port+04h] OUT DX,AL MOV DX,WORD PTR CS:[Cfg_Port+06h] IN AL,DX Read_Configuration_Data ENDP Write_Configuration_Data PROC NEAR...
  • Page 57 C o m p a c t B o a r d P C M - 9 4 5 2 Write_Configuration_Data ENDP Superio_Set_Reg proc near push ax MOV DX,WORD PTR CS:[Cfg_Port+04h] mov al,cl out dx,al pop ax inc dx out dx,al Superio_Set_Reg endp.Set_Logic_Device proc near Set_Logic_Device proc near push ax...
  • Page 58 C o m p a c t B o a r d P C M - 9 4 5 2 Cfg_Port DB 087h,001h,055h,055h DW 02Eh,02Fh END Main Note: Interrupt level mapping 0Fh-Dh: not valid 0Ch: IRQ12 03h: IRQ3 02h: not valid 01h: IRQ1 00h: no interrupt selected A - 10...

  • Page 59: Appendix B I/O Information

    C o m p a c t B o a r d P C M - 9 4 5 2 Appendix I/O Information B - 1 Appendix B I/O Information...

  • Page 60: I/O Address Map

    C o m p a c t B o a r d P C M - 9 4 5 2 B.1 I/O Address Map Address Description User Address 000-01F DMA Controller #1 000-000F 020-03F Interrupt Controller #1, Master 020-021 040-05F System Time 040-043 060-06F...

  • Page 61: Irq Mapping Chart

    C o m p a c t B o a r d P C M - 9 4 5 2 B.3 IRQ Mapping Chart IRQ0 System Timer IRQ8 System CMOS / Real time clock IRQ1 Keyboard IRQ9 Microsoft ACPI – Compliant system IRQ2 Cascade to IRQ Controller IRQ10 COM3...

  • Page 62: Appendix C Mating Connector

    C o m p a c t B o a r d P C M - 9 4 5 2 Appendi Mating Connecotor C - 1 Appendix C Mating Connector...

  • Page 63: List Of Mating Connectors And Cables

    C o m p a c t B o a r d P C M - 9 4 5 2 C.1 List of Mating Connectors and Cables The table notes mating connectors and available cables. Connector Function Mating Connector Available Cable P/N Label Cable...
  • Page 64 C o m p a c t B o a r d P C M - 9 4 5 2 Ethernet #1 LAN CN16 Ethernet #2 LAN CN17 Serial Port Serial Port CN18 Neltron 2026B-10 1701100207 Connector Cable Serial Port Serial Port CN19...

Table of Contents