Mounting; Orientation; Rigging - Chauvet Q-Wash User Manual

Setup

Mounting

Orientation

Rigging

Procedure The Q-Wash™ 419Z-LED comes with two omega brackets to which you can attach
Mounting Diagram
-8-
Before mounting this product, read and follow the
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
CHAUVET® recommends using the following general guidelines when mounting this
product.
· When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
· Make sure to mount this product away from any flammable material as indicated in
the Safety Notes.
· Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
· If hanging this product, make sure that the mounting location can support the
product's weight. See the
requirements of this product.
· When hanging this product, always secure to a fastening device using a safety cable
(included).
clamps. You must supply your own clamps and make sure that they are capable of
supporting the weight of this product. You will have to use two mounting points per
product. The omega brackets also serve to anchor this product to a panel. For floor
standing operation, this product has built-in rubber feet..
Floor Mounting
Safety
Technical Specifications
Clamp
Safety Cable
Overhead Mounting
Notes.
for the weight-bearing
Q-Wash™ 419Z-LED User Manual