Mounting - Chauvet Intimidator User Manual

Mounting

Orientation
Rigging
Mounting Diagram
Page 8 of 17
The Intimidator™ Wash LED 150 may be mounted in any position, provided there is
adequate room for ventilation around it.
Be sure that the structure onto which you are mounting this product can support its
weight. Please see the "Technical Specifications" section of this manual for weight
information.
Make sure to mount the fixture securely to a rigging point, whether an elevated
platform or a truss.
When rigging this product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracket has a 13 mm hole, which is appropriate for
this purpose.
When mounting this product overhead, always use a safety cable.
Before deciding on a location for this product, always make sure that it will be easy to
access the unit for maintenance and programming purposes.
When power linking multiple fixtures, you must always consider the length of the
power linking cable and mount the fixtures close enough for the cable to reach them.
Bracket
attachment
Rubber feet (4)
Safety bolt
attachment
Bottom of fixture
Intimidator™ Wash LED 150 User Manual Rev. 5