Table of Contents
Advertisement
Advanced sound configurations
Sound field parameter
2ch Stereo
DIRECT
7ch Stereo
CT LEVEL
SL LEVEL
SR LEVEL
SB LEVEL
PL LEVEL
PR LEVEL
2ch Enhancer
7ch Enhancer
■ Selecting decoders used with sound
field programs (Decoder Type)
Use this feature to select the desired decoder used with
MOVIE sound field programs (except "Mono Movie").
See page 45 for details about MOVIE sound field
program.
Available decoders
Decoder
PRO LOGIC
Dolby Pro Logic processing for any
sources.
PLIIx Movie
Dolby Pro Logic IIx (or Dolby Pro
Logic II) processing for movie
PLII Movie
sources. The Pro Logic IIx decoder
is not available when "SUR.B L/R
SP" is set to "NONE" (see page 71).
Neo:6 Cinema
DTS processing for movie sources.
64
En
2-channel stereo direct. Bypasses the decoders and the DSP processors of this unit for pure hi-fi
stereo sound when playing 2-channel analog sources.
Choices: AUTO, OFF
y
• Select "AUTO" to bypass the decoders, the DSP processors and the tone control circuitry only
when "BASS" and "TREBLE" are set to 0 dB (see page 48).
• Select "OFF" not to bypass the decoders, the DSP processors and the tone control circuitry
when "BASS" and "TREBLE" are set to 0 dB.
• When multi-channel signals (Dolby Digital and DTS) are input, they are downmixed to 2
channels and output from the front left and right speakers.
• The low-frequency signals of the front left and right channels are redirected to the subwoofer
in the following cases:
– "LFE/BASS OUT" is set to "BOTH" (see page 70).
– "FRONT SP" is set to "SMALL" (see page 71) and "LFE/BASS OUT" is set to "SWFR"
(see page 70).
7-channel stereo center, surround left, surround right, surround back, presence left and presence
right levels. Adjusts the volume level of each channel in the 7-channel stereo mode. The
available parameters differ depending on the setting of the speakers.
Control range: 0 to 100%
2-channel and 7-channel Compressed Music Enhancer effect level. The high-frequency signals
of some sources may be emphasized too much. In this case, set the effect level to "LOW".
Choices: HIGH, LOW
• Select "HIGH" for a high effect level.
• Select "LOW" for a low effect level.
Functions
Features
Selecting decoders
■ Selecting decoders for 2-channel
sources (surround decode mode)
Use this feature to play back sources with selected
decoders. You can play back 2-channel sources on multi-
channels.
Set the operation mode selector to L AMP and
then press V SUR. DECODE repeatedly on the
remote control to select the desired surround
decoder.
You can select from the following modes depending on the
type of source you are playing and your personal
preference.
y
You can change the decoder parameter settings. Press
R DISPLAY and then D k / n repeatedly on the remote control
to select the desired decoder parameter. You can change the value
of the selected parameter by pressing D l / h repeatedly on the
remote control.
Advertisement
Table of Contents
