Customizing This Unit (Manual Setup) - Yamaha RX-V861 Owner's Manual

Ampli-tuner audio-video
Hide thumbs Also See for RX-V861:
Table of Contents

Advertisement

Customizing this unit (MANUAL SETUP)

You can use the following parameters in "SET MENU" to adjust a variety of system settings and customize the way this
unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening
environment.
■ Auto setup
AUTO SETUP
Use this feature to automatically adjust speaker and system parameters (see page 28).
■ Manual setup
MANUAL SETUP
Use this feature to manually adjust speaker and system parameters.
Sound menu 1 SOUND MENU
Use this menu to manually adjust any speaker settings, alter the quality and tone of the sound output by the system or
compensate for video signal processing delays when using LCD monitors or projectors.
Parameter
A)SPEAKER SET
B)SPEAKER LEVEL
C)SP DISTANCE
D)EQUALIZER
E)LFE LEVEL
F)DYNAMIC RANGE
G)AUDIO SET
H)HDMI SET
I)EXTD SUR.
Input menu 2 INPUT MENU
Use this menu to manually reassign the input/output jacks, select the input mode or rename the input source.
Parameter
A)I/O ASSIGNMENT
B)INPUT RENAME
C)VOLUME TRIM
D)DECODER MODE
E)MULTI CH SET
Selects the size of each speaker, the speakers for low-frequency signal output, the crossover
frequency, and the assignment of the EXTRA SP terminal.
Adjusts the output level of each speaker.
Adjusts the distance of each speaker.
Adjusts the equalizer setting of the speakers.
Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.
Adjusts the dynamic range of Dolby Digital or DTS signals.
Adjusts the muting level, audio delay, maximum volume level and initial volume level.
Selects the component to play back HDMI audio signals.
Selects the mode of the decoders for the 6.1/7.1-channel playback.
Assigns the input/output jacks of this unit according to the component to be used.
Changes the name of the input source.
Adjusts the output volume of each input source.
Selects the input mode for the sources connected to the DIGITAL INPUT jacks on the rear
panel of this unit.
Sets the input channel numbers and other parameters of the input multi channel.
CUSTOMIZING THIS UNIT (MANUAL SETUP)
Features
Features
Page
70
72
73
73
74
74
74
75
75
Page
76
77
78
78
78
67
En

Advertisement

Table of Contents
loading

Table of Contents