Customizing This Unit (Manual Setup) - Yamaha RX-V663 Owner's Manual

Customizing this unit (MANUAL SETUP)

You can use the following parameters in "SET MENU" to adjust a variety of system settings and customize the way this
unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening
environment.
■ Auto setup AUTO SETUP
Use this feature to automatically adjust speaker and system parameters (see page 32).
■ Manual setup MANUAL SETUP
Use this feature to manually adjust speaker and system parameters.
Basic menu 1 BASIC MENU
Menu
A)SPEAKER SET EXTRA SP ASSIGN
LFE/BASS OUT
FRONT SP
CENTER SP
SUR. L/R SP
SUR.B L/R SP
CROSS OVER
SUBWOOFER PHASE
B)SP LEVEL FR.L/FR.R/CNTR/
SUR.L/SUR.R/
SBL/SBR/SWFR/
PR.L/PR.R
C)SP DISTANCE
UNIT
FRONT L/FRONT R/
CENTER/SUR. L/
SUR. R/SBL/SBR/
SWFR/PRNS L/
PRNS R
D)TEST TONE
Parameter
Selects the function of the speakers connected to the EXTRA SP
speaker terminal.
Selects the speakers that output the LFE (low-frequency effect) and the
low-frequency signals.
Selects the size of the front speakers.
Selects the size of the center speaker.
Selects the size and number of the surround speakers.
Selects the size and number of the surround back speakers.
Selects the crossover frequency of all the speakers set to "SML" (or
"SMALL") in "SPEAKER SET" (see page 77).
Switches the phase of your subwoofer if bass sounds are lacking or
unclear.
Adjust the balance the speaker levels between the front left or
surround left speakers and each speaker selected in "SPEAKER SET"
(see page 76).
Selects the unit to adjust the speaker distance.
Adjust the distance of each speaker and the delay applied to the
respective channel.
— Turns the test tone output on or off for the "SPEAKER SET", "SP
LEVEL", and "SP DISTANCE" settings.
CUSTOMIZING THIS UNIT (MANUAL SETUP)
Functions Page
76
76
77
77
77
77
78
78
78
79
79
79
71
En