Supplied Accessories - Integra DTR-50.3 Instruction Manual

Thank you for purchasing an Integra AV receiver.
Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will enable you
to obtain optimum performance and listening enjoyment
from your new AV receiver.
Please retain this manual for future reference.
En
4

Supplied Accessories

Make sure you have the following accessories:
Indoor FM antenna (➔ page 21)
AM loop antenna (➔ page 21)
Power cord (➔ page 21)
Speaker cable labels (➔ page 13)
Speaker setup microphone
Remote controller (RC-811M) and two batteries
(AA/R6)
* In catalogs and on packaging, the letter at the end of the product
name indicates the color. Specifications and operations are the
same regardless of color.
■
Installing the batteries
Note
• If the remote controller
doesn't work reliably,
try replacing the
batteries.
• Don't mix new and old
batteries or different
types of batteries.
• If you intend not to use
the remote controller for
a long time, remove the batteries to prevent damage from
leakage or corrosion.
• Remove expired batteries as soon as possible to prevent damage
from leakage or corrosion.
■
Aiming the remote controller
To use the remote controller, point it at the AV receiver's
remote control sensor, as shown below.
Transmission
Remote control sensor
Reception
Transmitter
Input sensor
(➔ page 31)
Batteries (AA/R6)
AV receiver
Approx. 16 ft. (5 m)
AV receiver
Approx. 16 ft. (5 m)