Remote Controller; Controlling The Av Receiver - Integra DTR-50.3 Instruction Manual

Remote Controller

Controlling the AV Receiver

*1
To control the AV receiver, press Receiver to select
Receiver mode.
You can also use the remote controller to control
Integra/Onkyo Blu-ray Disc/DVD player, CD player,
and other components.
See "Entering Remote Control Codes" for more
details (➔ page 74).
For detailed information, see the pages in parentheses.
Receiver button (22)
Activities buttons (42, 78)
*2
Remote Mode/Input Selector buttons (23)
SP Layout button (41)
*2
Arrow / / /
Setup button (43)
Listening Mode buttons (34)
Dimmer button (40)
Display button (41)
Muting button (41)
VOL / button (23)
Return button
*2 Home button (40, 63)
Sleep button (40)
■
Controlling the tuner
To control the AV receiver's tuner, press Tuner (or
Receiver).
You can select AM or FM by pressing Tuner repeatedly.
Arrow / buttons (28)
D.TUN button (29)
Display button
CH +/– button (29)
Number buttons (29)
*1 When you want to change the remote controller mode (target
component) without changing the current input source, press
Mode and within about 8 seconds, press Remote Mode.
Then, using the same AV receiver's remote controller, you
can control the component corresponding to the button you
pressed.
*2 These buttons can also be used when a Remote Mode other
than receiver mode is selected. (Pressing Home switches to
Receiver mode.)
and Enter buttons
En
11