Remote Controller - Integra DTR-50.4 Instruction Manual

Remote Controller

Controlling the AV Receiver
*1
To control the AV receiver, press Receiver to select
Receiver mode.
You can also use the remote controller to control
Integra/Onkyo Blu-ray Disc/DVD player, CD player,
and other components.
See "Entering Remote Control Codes" for more
details (➔ page 84).
For detailed information, see the pages in parentheses.
Receiver button (21)
Activities buttons (48)
*2
Remote Mode/Input Selector buttons (24)
SP (speaker layout) button (47)
*2
and Enter buttons
/ / /
Q Setup button (49)
Listening Mode buttons (38)
Dimmer button (46)
Display button (46)
Muting button (47)
VOL / button (24)
Return button
Home button (45)
Sleep button (46)
En-10
Safety Information and Introduction
■
Controlling the tuner
To control the AV receiver's tuner, press Tuner (or
Receiver).
You can select AM or FM by pressing Tuner repeatedly.
/ buttons (32)
D.TUN button (32)
Display button
CH +/– button (33)
Number buttons (32)
*1 When you want to change the remote controller mode (target
component) without changing the current input source, press
Mode and within about 8 seconds, press Remote Mode.
Then, using the same AV receiver's remote controller, you can
control the component corresponding to the button you
pressed.
*2 These buttons can also be used when a Remote Mode other
than Receiver mode is selected.