Remote Access Code; Remotely Access The Answering System - Clarity C1 User Manual

ANSWERING SYSTEM SETTINGS

Remote Access Code

To access your answering system remotely from any touch-tone telephone,
you need to enter a two-digit number (00-99). Unless you change it, the
remote access code is 19.
To change the remote access code:
1. In idle mode, press <MENU/SELECT>, then <UP/DOWN> to select
Answering sys.
2. Press <MENU/SELECT>, then <UP/DOWN> to select Ans sys
setup.
3. Press <MENU/SELECT>, then <UP/DOWN> to select Remote
Code.
4. Press <MENU/SELECT>, then use the keypad to enter a two-digit
remote code.
5. Press <MENU/SELECT> to confirm.
Remote Access
You can access the answering system remotely by dialing your home telephone
number from any touch-tone telephone.
To remotely access the answering system:
1. Dial your telephone number from any touch-tone telephone.
2. When the answering system answers, enter the two-digit remote
access code (19, unless you have changed it; refer to Remote access
code). The answering system automatically announces the number of
messages (new or old) if there are any.
3. If there are new messages, the answering system automatically begins
to play new messages only.
-OR-
If there are no new messages, the answering system automatically
begins to play all old messages.
4. You can also enter the remote commands - see table.
5. Hang up to end the call and save all messages.
48
ANSWERING SYSTEM SETTINGS
Press to listen to all messages. If there are new messages,
Play all messages the system plays back only the new messages (oldest first).
1 If there are no new messages, the system plays back all old
messages (oldest first).
Play new messages
Press to listen to new messages only.
2
Delete a message Press during a message playback to delete the current
3 message.
Delete all old
messages Press to delete all old messages.
33
To repeat the message currently playing, press 4 after
Replay current or the answering system plays the day and time the current
previous message was received.
message To listen to the previous message, press 4 while the
4 answering system is playing the day and time the current
message was received.
Stop
Press to stop playback and recording.
5
Play help menu
Press to listen to a list of remote commands.
* 5
Skip to next
Press during playback to skip the current message and
message
advance to the next message.
6
Record an
Press to record a new announcement. Begin speaking after
announcement
the long beep.
* 7
Exit or hang up
Press to end remote access (the call is terminated).
8
Turn system on
or off Press to turn the answering system on or off.
0
49