Table of Contents
Advertisement
Operation
Vacuum Assembly and Charging
NOTE: Before assembling, please be sure that all parts and accessories are included by reviewing the
'Machine Overview' page.
Extend the handle into an upwards
position – it will lock into place.
Insert the plug adaptor to the power
outlet and then the connection into
the side of the charging base.
The charger indicator lights (on the
side of the charging base) will turn
red to show it is charging.
vax.com.au
Place the handheld vacuum onto the
body of the machine.
For initial battery charge – allow 11
hours. For ongoing product charging
– allow between 8-11 hours
depending on the battery drain.
When charging is complete, the
indicator light will turn green.
Slide the stick vac onto the charger
base by aligning the slot on the back
of the stick vac to the slot on the
charger base.
4
Advertisement
Table of Contents
