IMPORTANT: If the inlet or hose is blocked, switch off dropped into water. Return the vacuum cleaner to the vacuum cleaner and remove the blockage(s) a Vax Authorised Service Agent or suitably before re-starting the vacuum cleaner. qualified person for examination, repair or adjustment.
Page 4
VS_19TL_Artwork.qxd 3/5/06 17:26 Page 5 How to Assemble / How to Operate 3. How to Assemble IMPORTANT: Always unplug the vacuum cleaner from the electrical outlet before assembling or removing the accessories. 1. Place the base of the cleaner so it is facing away from you.
Page 5
VS_19TL_Artwork.qxd 3/5/06 17:26 Page 6 Accessories/Dirt Container & Filter: Removal & Replacement/Belt or Brush removal and replacement Empty all of the dust and dirt from the dirt container 5. Accessories (fig. 6/1). 1. Make sure the vacuum cleaner has been switched off and is in an upright position.
VS_19TL_Artwork.qxd 3/5/06 17:26 Page 7 Troubleshooting 8. Troubleshooting W W A A R R N N I I N N G G : : TO REDUCE RISK OF PERSONAL INJURY UNPLUG VACUUM CLEANER BEFORE SERVICING PROBLEM: Cleaner won’t run Cause: Not properly plugged into electrical outlet. Solution: Plug cord in firmly.
Page 7
Monday-Friday. 9.00am to 5.00pm. An answerphone will be available out of these hours. Any queries or concerns about using your Vax, call the Vax Careline. Calls are charged at the UK national rate. Please make a note of the model number and serial number of your Vax before calling.
Page 8
17:26 Page 1 EEC STATEMENT OF COMPLIANCE Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility declare that the product VS-19TLT Turboforce Lite is manufactured in compliance with the following: Safety: 73/23/EEC Low Voltage Directive, as modified by 93/68/EEC EMC: 89/336/EEC Electromagnetic Compatibility Directive, as modified by 93/68/EEC Waste electrical products should not be disposed of with household waste.
Need help?
Do you have a question about the Turbo Force Lite VS-19TLT and is the answer not in the manual?
Questions and answers