Using Balance Adjustment; Using The Equaliser - Pioneer AVIC-F20BT Operation Manual

Chapter
27 Customising preferences
4 Touch the item that you want to
change the setting.
# Touch .
Returns the previous screen.

Using balance adjustment

You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
Display the "AV Sound Settings"
1
screen.
= For details, refer to Displaying the "AV
Sound Settings" screen on the previous
page.
2 Touch [FAD/BAL].
When "Sub. W" is selected in "Rear SP",
"Balance" will be displayed instead of
"FAD/BAL" and front/rear speaker balance
cannot be adjusted.
= For details, refer to Setting the rear output
on page 145.
3 Touch [a] or [b] to adjust front/rear
speaker balance.
Each time you touch [a] or [b], the front/rear
speaker balance moves towards the front or
the rear.
"Front: 15" to "Rear: 15" is displayed as the
front/rear speaker balance moves from front to
rear.
Setting "Front:" and "Rear:" to "0" is correct
when using a two speaker system.
4 Touch [c] or [d] to adjust left/right
speaker balance.
Each time you touch [c] or [d], the left/right
speaker balance moves towards the left or the
right.
148
Engb
"Left: 15" to "Right: 15" is displayed as the
left/right speaker balance moves from left to
right.

Using the equaliser

The equaliser lets you adjust equalisation to
match vehicle interior acoustic characteristics
as desired.
Recalling equaliser curves
There are seven stored equaliser curves that
you can easily recall at any time. Here is a list
of the equaliser curves:
Equaliser curve
SuperBass is a curve in which only low-pitched
sound is boosted.
Powerful is a curve in which low-pitched and high-
pitched sounds are boosted.
Natural is a curve in which low-pitched and high-
pitched sounds are slightly boosted.
Vocal is a curve in which the midrange, which is the
human vocal range, is boosted.
Flat is a flat curve in which nothing is boosted.
Custom1 is an adjusted equaliser curve that you cre-
ate. A separate custom curve can be created for each
source.
Custom2 is an adjusted equaliser curve that you cre-
ate. If you select this curve, the effect is applied to all
AV sources.
Display the "AV Sound Settings"
1
screen.
= For details, refer to Displaying the "AV
Sound Settings" screen on the previous
page.