Installation Instructions; Preparing To Install Your Washer - GE Profile WPDH8900 Owner's Manual & Installation Instructions

Installation
Instructions
If you have any questions, call 800.GE.CARES (800.432.2737)
GEAppliances.com
or visit our Website at:
In Canada, call 1.800.561.3344
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT –
•
for local inspector's use.
IMPORTANT –
•
codes and ordinances.
Note to Installer –
•
instructions with the Consumer.
Note to Consumer –
•
for future reference.
• Skill level – Installation of this appliance requires
basic mechanical and electrical skills.
• Completion time – 1-3 hours
• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not
covered under the Warranty.
FOR YOUR SAFETY:
WARNING
• This appliance must be properly grounded and
installed as described in these Installation Instructions.
• Do not install or store appliance in an area where
it will be exposed to water/weather. See Location
of Your Washer section.
• NOTE: This appliance must be properly
grounded, and electrical service to the washer
must conform with local codes and ordinances
and the latest edition of the National Electrical
Code, ANSI/NFPA 70.
www.GEAppliances.ca
or visit
Save these instructions
Observe all governing
Be sure to leave these
Keep these instructions
WPDH8850, WPDH8910, WPDH8900
TOOLS REQUIRED FOR
WASHER INSTALLATION
❏ 1/4" nut driver
❏ 3/8" socket with ratchet
❏ 3/8" open-end wrench
❏ Adjustable wrench or 7/16" socket with ratchet
❏ Adjustable wrench or 9/16" open-end wrench
❏ Channel-lock adjustable pliers
❏ Carpenter's level
PARTS SUPPLIED
❏ Water Hoses (2)
16
Washer
❏ Cable Tie
❏ Hose Guide