Sangean HDT-1 User Manual page 16

Advanced Information
Long press INFO button for 2 seconds to enter Advanced
Information. Press and release INFO button will cycle through
information of RESET, LCD Contrast Adjust, Bit Error Rate,
The carrier to noise ratio, FUSE Bit Check, Transmission Mode,
Station ID and Software version.
a. RESET –
in RESET mode, press PRESET button to RESET the tuner.
The tuner setting will be reset to its initialized factory setting.
b. LCD Contrast –
Using TUNING UP or DOWN button to adjust LCD contrast.
c. Bit Error Rate
d. The carrier to noise ratio
e. Fuse Bit Check
f. Transmission Mode
g. Station ID
h. Software version are for factory and after sales
service reference.
15
18 2006/10/19, ¤U¤È 02:46
20060929_HDT-1_381QA0S-A_GB.p65