Connecting Devices To The Server - Fujitsu PRIMERGY RX300 S7 Operating Manual

5.3

Connecting devices to the server

The connectors for external devices are on the front and rear of the server. The
additional connectors available on your server depend on the expansion cards
installed. For further information refer to the "PRIMERGY RX300 S7 Server
Upgrade and Maintenance Manual".
Figure 2: Connection panel on the rear
1 Video connector (blue)
2 Management LAN connector
3 Standard LAN connector (LAN 2)
* The serial interface COM1 can be used as the standard interface or for
communication with iRMC S3.
I
Some of the devices that can be connected may require the installation
and setting up of special software (e.g. drivers) (see the documentation
for the connected device).
Ê Connect the desired devices to the server.
RX300 S7
4 Shared LAN connector (LAN 1)
5 Serial connector COM1*
(turquoise)
6 4 USB connectors (black)
Operating Manual
Hardware installation
55