Fujitsu PRIMERGY RX300 S7 Operating Manual page 72

Starting up and operation
LAN indicators
Figure 10: Indicators on the connection panel: LAN indicators
1 LAN
link/transfer
2 LAN speed
I
Depending on the settings in the BIOS, the standard LAN connector 1
may also be used as a service LAN connector. You will find further
information in the "D2939 BIOS Setup Utility for PRIMERGY RX300 S7
Reference Manual".
72
Steady green signal when a LAN connection exists.
Remains dark when no LAN connection exists.
Flashes green when LAN transfer takes place.
Steady yellow signal in the event of a LAN transfer rate
of 1 Gbit/s
Steady green signal in the event of a LAN transfer rate
of 100 Mbit/s.
Remains dark in the event of a LAN transfer rate of
10 Mbit/s.
Operating Manual
RX300 S7