Adjusting The Lumbar Support - Renault GRAND SCENIC Driver's Handbook Manual

dRIVER's sEAT WITh ELEcTRIc cONTROLs
Switch 4 is used for adjusting the seat
base and switch 3 is used for adjusting
the seatback. On equipped vehicles,
buttons 2 store the chosen driving posi-
tion (refer to the following page).
Adjusting the seat position
To move the seat forwards or back
Move switch 4 forwards or backwards.
To raise or lower the seat base
Move switch 4 upwards or downwards.

Adjusting the lumbar support

on the driver's seat
Raise or lower handle 5 to increase or
decrease the support.
Adjusting the seatback
To tilt the seatback, move the top of
switch 3 forwards or backwards.
1.18
2
3
1
4
heated seats
(depending on vehicle)
With the engine running, turn control 1
to either position 1, 2 or 3 (depending
on the temperature required). An indi-
cator light on the instrument panel lights
up once the front seat heating system is
operating.
The system, which has a thermostat,
decides whether or not the heating is
needed, according to the position se-
lected.
For safety reasons, carry
out any adjustments when
the vehicle is not being
driven.
5
We would advise you not
to recline the seatbacks too
far to ensure that the effec-
tiveness of the seat belts is
not reduced.
Nothing should be placed on the
floor (area in front of driver) as such
objects may slide under the pedal
during braking manoeuvres, thus
obstructing its use.