Controls And Indicators - Kogan KAMATANDETA User Manual

CONTROLS & INDICATORS
A. Operating Modes
"OFF" - Power off.

"DISC"- Discrimination mode. Works with DISC/TONE. Discriminates the

metal type based on the tone.
TONE - Works with DISC/TONE. Sounds two different tones for different

types of metal.
ALL METAL- In this mode, the detector can detect all kinds of metal with

B. VOLUME - You can set the volume to the desired level from LOW to HIGH.
DISC/TONE
C.
You can set the mode switch to any desired position by rotating it from
"0" to "10". When in DISC mode, the detector discriminates the
metal type according to the length of the tone it sounds. When in TONE mode,
the detector discriminates the metal type as per the volume of the tone.
D. Target Pinpointing
Press the red button at the top of the handle to lower the sensitivity in order to
pin-point targets more accurately.
E. PHONE" jack
Connect earphones to the PHONE jack, speaker inside will be disconnected.
any setting of DISC/TONE.