Local Network - D-Link DSL-2750U User Manual

4.3.4 Local Network

You can configure the LAN IP address according to the actual application. The preset IP address is 192.168.1.1. You can use the default settings and DHCP service to
manage the IP settings for the private network. The IP address of the device is the base address used for DHCP. To use the device for DHCP on your LAN, the IP
address pool used for DHCP must be compatible with the IP address of the device. The IP address available in the DHCP IP address pool changes automatically if you
change the IP address of the device.
You can also enable the secondary LAN IP address. The two LAN IP addresses must be in different networks.
Choose Setup > Local Network. The Local Network page shown in the
following figure appears.
DSL-2750U User Manual
29