System Log; Logout - D-Link DSL-2750U User Manual

4.5.5 System Log

Choose MAINTENANCE > System Log. The System Log page shown in the
following figure appears.
This page displays event log data in the chronological manner. You can read the
event log from the local host or send it to a system log server. Available event
severity levels are as follows: Emergency, Alert, Critical, Error, Warning, Notice,
Informational and Debugging. In this page, you can enable or disable the
system log function.
The procedure for logging the events is as follows:
Step 1 Select Enable Log check box.
Step 2 Select the display mode from the Mode drop-down list.
Step 3 Enter the Server IP Address and Server UDP Port if the Mode is set
to Both or Remote.
Step 4 Click Apply to apply the settings.
Step 5 Click View System Log to view the detail information of system log.

4.5.6 Logout

Choose MAINTENANCE > Logout. The page shown in the following figure
appears. In this page, you can log out of the configuration page.
DSL-2750U User Manual
81