Connection Wizard: Step 3: Bandwidth Management; Connection Wizard Complete; Figure 21 Wizard Step 3: Bandwidth Management; Table 19 Wizard Step 3: Bandwidth Management - ZyXEL Communications P-335 Plus User Manual

P-335 Plus User's Guide
Table 18 Wizard Step 2: WAN MAC Address
LABEL
Back
Next
Exit

3.4 Connection Wizard: STEP 3: Bandwidth management

Bandwidth management allows you to control the amount of bandwidth going out through the
ZyXEL Device's WAN or LAN port and prioritize the distribution of the bandwidth according
to the traffic type. This helps keep one service from using all of the available bandwidth and
shutting out other users.

Figure 21 Wizard Step 3: Bandwidth Management

The following fields describe the label in this screen.

Table 19 Wizard Step 3: Bandwidth Management

LABEL
Enable BM for all traffic
automatically
Back
Next
Exit

3.5 Connection Wizard Complete

Follow the on-screen instructions and click Finish to complete the wizard setup.
54
DESCRIPTION
Click Back to return to the previous screen.
Click Next to continue.
Click Exit to close the wizard screen without saving.
DESCRIPTION
Select the check box to have the ZyXEL Device apply bandwidth
management to traffic going out through the ZyXEL Device's WAN or LAN
port. Bandwidth is allocated according to the traffic type automatically. Real-
time packets, such as VoIP traffic always get higher priority.
Click Back to return to the previous screen.
Click Next to continue.
Click Exit to close the wizard screen without saving.
Chapter 3 Connection Wizard