Volvo S60 Owner's Manual page 293

To skip a lesson and go to the next one,
press the button for voice recognition and say
"Next". Go back to the previous lesson by
saying "Previous".
Exit the instructions by means of a long press
on the button for voice recognition.
Voice training
The system displays up to fifteen phrases for
you to say. Voice training can be started in
the menu system MY CAR under
Voice settings Voice training. Choose
between User 1 or User 2 . For a description
of the menu system, see page 211.
After voice training has been completed,
remember to set your user profile under
Voice user setting
.
Additional settings in MY CAR
•
User setting - Two user profiles can be
set, the function is activated in the menu
system MY CAR under Settings
settings Voice user setting. Choose
User 1 User 2
between or . For a descrip-
tion of the menu system, see page 211.
•
Voice output volume - Can be changed
in the menu system MY CAR under
Settings Voice settings
output volume. For a description of the
menu system, see page 211.
Using voice commands
The driver initiates a dialogue with the voice
commands by pressing the button for voice
recognition (see illustration on page 290).
Once a dialogue has been started, commonly
used commands will be shown in the screen.
Greyed-out text or text within brackets is not
included in the spoken command.
When the driver becomes accustomed to the
Settings
system, he/she can speed up the command
dialogue and skip the prompts from the sys-
tem, by briefly pressing the button for voice
recognition.
Commands can be given in several ways
The command "Phone call contact" can be
pronounced as e.g.:
•
"Phone > Call contact" - Say "Phone",
wait for the system's reply, and then con-
tinue by saying "Call contact."
Voice
or
•
"Phone call contact" - Say the whole
command in one sequence.
Quick commands
Quick commands for the phone can be found
in the menu system MY CAR under
Voice
Voice settings
Phone commands
06 Infotainment system
Voice recognition* mobile phone
commands
system, see page 211.
Dial a number
The system understands the numbers 0 (zero)
to 9 (nine). These numbers can be pro-
nounced individually, in groups of several
numbers at a time, or the whole number all at
once. Numbers greater than 9 (nine) cannot
be handled by the system, e.g. 10 (ten) or 11
(eleven) are not possible.
The following is an example of a dialogue
with voice commands. The system's reply will
vary depending on the situation.
The user starts the dialogue by saying:
Phone > dial number
or
Phone dial number
System reply
Number?
User action
Start saying the numbers (as individual units,
i.e. six-eight-seven, etc.) in the phone num-
ber. If you say several numbers and pause,
the system will repeat them, and then say
"Continue".
Settings
Continue to say the numbers. When finished,
Voice command list
finish the command by saying "Call".
and General
*
Option/accessory, for more information, see Introduction.
. For a description of the menu
06
}}
291