Volvo S60 Owner's Manual page 179

Volvo s60 ower's manual
Hide thumbs Also See for S60:
Table of Contents

Advertisement

The lower label in the illustration describes
the physical data for the laser light:
IEC 60825-1:1993 + A2:2001. Complies
with FDA (U.S. Food Administration)
standards for laser product design with
the exception of deviations in accordance
with "Laser Notice No. 50" from
26 July 2001.
Radiation data for the laser sensor
The following table specifies the laser sen-
sor's physical data.
Maximum pulse energy
Maximum average output
Pulse duration
Divergence (horizontal x verti-
cal)
WARNING
If any of these instructions are not followed
then there is a risk of eye injury!
Never look into the laser sensor (which
emits spreading invisible laser radia-
tion) at a distance of 100 mm or closer
with magnifying optics such as a mag-
nifying glass, microscope, lens or simi-
lar optical instruments.
Testing, repair, removal, adjustment
and/or replacement of the laser sen-
sor's spare parts must only be carried
out by a qualified workshop - we rec-
2.64 µJ
ommend an authorised Volvo work-
shop.
45 mW
To avoid exposure to harmful radia-
33 ns
tion, do not carry out any readjust-
ments or maintenance other than
28° × 12°
those specified here.
The repairer must follow specially
drawn up workshop information for the
laser sensor.
Do not remove the laser sensor (this
includes removing the lenses). A
removed laser sensor does not fulfil
04 Driver support
City Safety™
laser class 3B as per standard IEC
60825-1. Laser class 3B is not eye-
safe and therefore entails a risk of
injury.
The laser sensor's connector must be
unplugged before removal from the
windscreen.
The laser sensor must be fitted onto
the windscreen before the sensor's
connector is plugged in.
The laser sensor transmits laser light
when the remote control key is in posi-
tion II and also with the engine
switched off (see page 81 on key posi-
tions).
Symbols and text messages
In conjunction with automatic braking by the
City Safety™ system, one or more symbols
may illuminate in the combined instrument
panel and a text message may be shown.
A text message can be acknowledged by
briefly pressing the OK button on the direc-
tion indicator stalk.
04
177

Advertisement

Table of Contents
loading

Table of Contents